Elvacite® acrylic resins are polymers or copolymers of methyl methacrylate or other acrylic monomers for use in solvent-applied lacquers, inks, adhesives and specialty coatings. Elvacite® acrylic resins offer the distinctive combination of properties associated with high-quality coating resins.
A pale yellowing-resistant aldehyde resin, which is soluble in almost all paint solvents and is compatible with practically all coating raw materials. Its main uses are a combination with other resin binders and the production of all-purpose pigment pastes.
Alkyd resin is a synthetic polyester resin and always modified with natural fatty acids or oils and/or synthetic fatty acids. The possibility of variation of alkyd resin in structure, composition and thus in the paint technical properties is extraordinarily large.
Amino crosslinker are used to reinforce the properties of the main resin.
ATP2G (2nd Generation ATP) allows users to measure quantitative microbial content in really every sample and this in just a few minutes. From water to chemical-complex materials, surfaces and solids. In Europe there are already hundreds of companies in coating application that use ATP2G. In particular for entry control but also for plant-hygiene. ATP2G is not only lightning-fast, but also far more accurate than traditional test method. Certainly, when it comes to biocide performance analyses, ATP2G offers superior, fast and accurate microbial insight.
Additive range that offers protection against corrosion inside metal containers containing water-borne paints and against flash rust of metal substrates coated with water-borne coatings. Sustainable alternatives are available.
Foam is a dispersion of air and other gases in a liquid or solid. Apart from a few exceptions (foams in shampoos, shaving creams, hair styling mousses, carpet cleaners, polyurethane or other polymers that insulate homes) foams are generally undesirable. Foams disturb production sequences in which liquids, particularly water, have an important function as transporting media, and in the worst cases they can even bring such processes to a standstill. Furthermore, foams can lead to lower production yields and finished products of poorer quality.
Low-dust organic chemical blowing agent for the production of polymer foam that is used in polymer melts, rubber compounds and PVC plastisols.
Range of Tennants Additives: emulsifier, compatibilizer, anti-freeze for coatings, wetting and levelling agents
Tennanol surfactant is a wetting agent and molecular defoamer that provides a unique combination of performance benefits. Tennanol surfactant’s unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control, and viscosity stabilization. The hydrophobic nature of Tennanol surfactant typically results in significantly reduced water sensitivity compared to either conventional ethoxylated or anionic surfactants.
Polyvinyl acetate is processed in the form of solutions in organic solvents or as a dispersion.
About 40 % solids water based acrylic dispersion special developed for water based inks with a high TG, self-crosslinking mechanism for improved adhesion, showing good hardness and chemical resistances.
Hardeners are basically liquid resins with amino nature that can react with the oxiranic ring of the epoxy resin giving a solid product with high molecular weight. The hardeners are characterized by their hydrogen equivalent (HEW), that is the weight in grams needed to have one reactive hydrogen atom. From this parameter we can calculate the so called PHR (per hundred ratio), that is the weight of hardener that we need for a stechiometric reaction with 100 grams of epoxy resin.
Tennants presents a class of very versatile thermosetting products thanks to their outstanding chemical-physical characteristics. There are a number of properties of Epoxy Resin Systems that influence the choice over other technologies in its application:
Low shrinkage and very good dimensional stability, can be easily fabricated. Good thermal properties, good physical properties such as toughness, flexibility and abrasion resistance, strong adhesive power on various substances, high reactivity allows good hardening at low temperature
Dry paint films are vulnerable to a variety of microorganisms that provide a basis for algal, fungal, moss or lichen growth and cause severe problems such as discoloration and physical degradation.
Halogen-free, phosphorus- and nitrogen-based intumescent flame retardant (IFR). Good compatibility, stable flame retardancy and excellent migration resistance. Offers good heat yellow stability and processability. Specially developed for polyolefin (PE, PP), but is also suitable for use in thermoplastic elastomer (TPE, TPU), EVA, and rubber.
Functional product acting as a reinforcement agent, improving anti-sagging and anti-settling properties of the system.
In-Can Biocides protects water-based products against mainly bacterial contamination and brings a long term stability to the product which makes it possible to stock your adhesive for a longer period.
Intumescent coatings are used to protect all wood structures, in clear, white or colored systems.
Polyamide-imides display a combination of properties from both polyamides and polyimides, such as high strength, melt processability, exceptional high heat capability, and broad chemical resistance. Polyamide-imide polymers can be processed into a wide variety of forms, from injection or compression moulded parts and ingots, to coatings, films, fibers and adhesives.
Saturated, unsaturated and oil-free polyester resin for your formulation.
PEA di- and tri- functional liquid hardeners with amino nature that can react with the oxiranic ring of the epoxy resin and various reactive resins to give a solid product with high molecular weight.
It is used as a binder in coatings and varnishes. Further use is the plastic as a white glue (wood glue), wallpaper supplier or adhesive. The universal adhesive UHU, known in Germany, is a forty percent solution of polyvinyl acetate in acetone and methyl acetate. Even simple craft glue often contains predominantly PVA and is then referred to as vinyl glue, among other things.
Rosin is brittle and friable, with a faint piny odour. It is typically a glassy solid, though some rosins will form crystals, especially when brought into solution. The practical melting point varies with different specimens, some being semi-fluid at the temperature of boiling water, others melting at 100 °C to 120 °C. It is very flammable, burning with a smoky flame, so care should be taken when melting it. It is soluble in alcohol, ether, benzene and chloroform.
Organofunctional silanes are compounds that combine the functionality of a reactive organic group with inorganic functionality in a single molecule. This special property allows them to be used as molecular bridges between organic polymers and inorganic materials. This bridging property of organofunctional silanes is crucially important in four application fields:
Silicone emulsions typically contain a silicone component (usually a silicone oil), water and the required emulsifiers to obtain a stable emulsion. From the chemistry perspective, a silicone component is a finite chain of silicone and oxygen atoms bonded to each other. Besides these bonds, silicone itself has two other bonds to organic groups. In most cases, these components are methyl groups (CH3) that provide to the silicone component its characteristic semi-organic behaviour.
Range of silicone surface additives to improve slip, mar resistance, levelling, substrate wetting, anti-blocking properties and gloss.
Non labeled solvents used in coatings and adhesive formulations. High boiling point.
Tannin stain blocking additives were developed to augment resin technology in stopping the migration of these soluble stains to the surface of the paint. Blocking tannins and other common wood stains (sap, rosin or other oleo resinous substances) can be quite daunting for water-based coatings. TenADD stain blockers come as liquid additives which are formulated into paint where they are designed to react with soluble tannins to form insoluble complexes.
Tackifier resin dispersions are aqueous, solvent-free dispersions for the manufacture of pressure-sensitive adhesives based on acrylic, natural rubber or SBR emulsions. When formulated correctly they provide an excellent balance of adhesion and cohesion to a wide range of substrates. It can run on industry standard coaters at high speed due to its excellent stability. All available grades are alkyl phenol ethoxylate (APE) free.
Polyacrylate or Polyurethane based thickener for inks and coatings.
Titanium dioxide (TiO2) is the most widely used white pigment in the world. It’s the mainstay of our range and we are proud to be a front-runner in this highly specialized sector. Titanium is the 9th most abundant element in the world and titanium dioxide is the oxide of the metal, which occurs naturally in two main forms: rutile and anatase. It is then processed to remove any impurities, creating an incredibly useful, multi-purpose, white pigment. Odourless and absorbent, TiO2 has a high refractive index – meaning it has excellent light scattering capabilities. Ideal for inclusion in a variety of consumer and industrial products, TiO2 is particularly well suited to applications that need to deliver high levels of opacity, brightness and ultraviolet (UV) protection.
Acrylic based UV curable resin for coatings.
White powder, colorless and transparent solution once in solvent. Excellent solvent release, film-forming, dispersibility, and adhesion on the substrates (especially on PET)
Wetting & Dispersing additives to improve the dispersion step in the coatings process, reducing the viscosity, increasing the pigment load, paint stabililty, final colour and gloss.
